My Communities

Risks are important in project summaries, as they help us prepare for worst-case scenarios. There can be no surprises when all the if's are taken into consideration.
with regards to assumption, although projected without any evidence, can still be helpful. However, every statement and conviction must be backed up by evidence.
I look forward to learning how to collect data relevant to the "indicator" column.

I apologize but I do not see a prompt to respond to. So I will just write about what I understood from the module. I agree that it is important to include risks and assumptions in the logframe. This is because risks and assumptions will affect the monitoring and evaluation of the project in case our assumptions are mistaken or the risks become true. In this case, in the course of monitoring and evaluation, you will already have an idea what to look out for that may negatively affect your project. You can also prepare an alternative plan in case the risk or assumption negatively affects the project. This could be a learning moment to prepare for the next plan/phase.

I apologize but I do not see a prompt to respond to. So I will just write about what I understood from the module. I agree that it is important to include risks and assumptions in the logframe. This is because risks and assumptions will affect the monitoring and evaluation of the project in case our assumptions are mistaken or the risks become true. In this case, in the course of monitoring and evaluation, you will already have an idea what to look out for that may negatively affect your project. You can also prepare an alternative plan in case the risk or assumption negatively affects the project. This could be a learning moment to prepare for the next plan/phase.

@CelmaTomas4 said in Module 2 Discussion: Risks and Assumptions:

Its important to pay attention and analyze the risks cause it will make all difference along the project as to the monitoring and evaluation process. I was able too understand about them and now I am ready to apply the knowledge's that I got.

It is correct that risks will make a difference for a project, in the same way, we should also pay attention to the assumptions we make because these will also make a difference.

Risks are important in project summaries, as they help us prepare for worst-case scenarios. There can be no surprises when all the if's are taken into consideration.
with regards to assumption, although projected without any evidence, can still be helpful. However, every statement and conviction must be backed up by evidence.
I look forward to learning how to collect data relevant to the "indicator" column.

So my Project is the helping the children in education. So the risk and assumption of this project will be in the input section: Not getting good teachers in hand; Output: The student are showing no interest in the lessons; Outcome: The lessons are out of date and in the Impact : No progress in the student's education is seen.

That was great.
Have learnt a lot.

Risk and assumptions are the what ifs questions that needs to be asked during the project planning and implementation stages. These questions ensures we assess potential problems and risks even before the start of the project and this helps provide possible solutions or alternatives for these issues/risks

Conjecture regarding the explanation or possibility of an event.

I think the concept of putting together a logframe is one that is going to come naturally for those familiar with research. We are familiar with digging into the literature to find an evidence-base. We are typically proficient at examining implications.

What a great course I have learnt a lot especially on the risk and assumptions that you must find possible problems that might affect your activities and you must discover them and know that when they arise you know how to deal with them and you plan ahead. Thank you

risks and hypotheses allow us to ask questions about different possibilities of risks likely to occur in the future

Risks and assumptions play an important role in both the creation of a log frame as well as in a project as a whole. This module did a great job of illustrating the importance of assessing risks and examining assumptions and the way that this step can impact your project as a whole.

In monitoring and evaluation risks and assumptions play crucial roles in shaping effectiveness of the process so It's essential to identify, monitor, and address these risks and assumptions throughout the M&E process to enhance the reliability and validity of the evaluation results. example of risks and assumption can bias in data

An assumption is an idea that is accepted to be true without certainty. Until we validate assumptions, they also represent a risk. Risks are future events that have a likelihood of occurrence and an anticipated impact. Risks can be opportunities (positive) or threats (negative).

I have a question, can we state risk and assumptions in question form?? I.e what if?

Risk and assumptions are important once identified during the early phases of a log-frame. Some may be unforeseen such political instability and natural calamities. These set backs make evaluation and preparation for the next project more thorough. A crucial example is projects that were set back by the covid 19 pandemic.

A good example of risks and assumptions is seen during the covid 19 pandemic where so many projects came to a halt and up to date some have not yet recovered. Unforeseen political events, natural calamities or disease explosions are now actively being taken into account in the early logframe phase when creating projects

A good example of risks and assumptions is seen during the covid 19 pandemic where so many projects came to a halt and up to date some have not yet recovered. Unforeseen political events, natural calamities or disease explosions are now actively being taken into account in the early logframe phase when creating projects

Risks are the things outside our control which could interfere with the actualization of your plan or goals while assumptions are those believes that we have that are not backed up by evidence, facts or data and they are otherwise known as biases.
Every row on the logical frame work has it own unique risk and assumptions. Example; the risk and assumption for the impact row is totally different from that of the outcome, output and input rows. the risks and assumptions are raised based on the activities stated with the project summary column for each row.
Indicators are those things that we measure to assess the progress of our project while means of verification is the tool that decides how the indicators will be measured.
Writing out risk and assumptions is a good way to avoid the problem of biases in the design and implementation of our project.
The risk and assumptions aid to raise some important monitoring and evaluation questions which in turn ensures the formidable nature of the logical frame work.

its really good to think about risks and assumptions before project start so it will easy to fix if you face challenges during project and to measure the success of project.
logo fram

Risks are anything outside your control that might disrupt your plan whilst assumptions are any personal bias that is incorporated in the project. Whilst developing a log frame in a project, it is crucial to take care of risks and assumptions that might impact the achievement of the project goals.

Risks are anything outside your control that might disrupt your plan whilst assumptions are any personal biais that is incorporated in the project. Whilst developing a logframe in a project, it is crucial to take care of risks and assumptions that might impact the achievement of the project goals.

I think there always have risks and assumptions when the project implements. But, the question is how I can reduce or minimal them to bring maximum the beneficial for my participants?

I think there always have risks and assumptions when the project implements. But, the question is how I can reduce or minimal them to bring maximum the beneficial for my participants?

Risks and assumptions in a project are things that could hinder a project from moving forward, or achieving its intended purpose or getting the deliverables from activities.
It's important to monitor the environment both internal and external to assess the potential risks and come up with mitigation measures

Assumptions: Beliefs about things likely to happen or be true. These are based on existing knowledge, experience, or expectations.
Risks: The potential for something negative to happen as a result of an uncertain event. Risks are linked to the possibility that our assumptions might be wrong.

Assumptions are the foundation for decision-making and action. We take action based on what we believe will happen.
Risks are the potential downsides of those actions. If our assumptions are wrong, we might encounter those risks.

Risk and assumptions is very important part of the log frame. we have to be ready to answer when during the impartation time of the project any problems occurring.

Risk and assumptions are important parts of in M&E plan. we can include them in the log frame.

Risk and assumptions are one of the main components in a logical frame. These can be filled using previous experiences and evidence or just assumptions.

Risk and assumptions are one of the main components in a logical frame. These can be filled using previous experiences and evidence or just assumptions.

Risks and Assumptions helps us to point out whether our logical frame will leads us to intended result. They are what if statement asking for evidence that our logical frame is adeqaute and scientific base. It is approach that helps you to point out possible failurity areas in the log frame

I have been part of various projects that unfortunately failed because we did not take into account the risks and how they would affect the projects' success. In this module, I have clearly seen why we need to consider risks so that we have contingent plans to address those risks. Additionally, we need to be aware of the assumptions we are making.

It is important to consider risks and potential contingencies to deal with the risks for the success of any project.

It is important to consider risks and potential contingencies to deal with the risks for the success of any project.

In every Projects there are risks and assumptions. These two factors help to draw our projects more efficiently and be able to consider intervals that need more attention and of course, reduce the future damage that can occur.

Considers risks in our projects allow us to develop strategies to improve our goals, our inputs, outputs, outcomes and impacts. And when we create assumptions is a way to close all gaps that can exist that we may not consider exactly as a risk.

For all people who wants to develop a project is necessary to create a margin of mistakes in their project, that will allow them to search for better measures.

An assumption is an idea that is accepted to be true without certainty. Until we validate assumptions, they also represent a risk.

Risks are future events that have a likelihood of occurrence and an anticipated impact. Risks can be opportunities (positive) or threats (negative). Frequently we focus on the negative and fail to consider the upside.

Risks can be described quantitatively or qualitatively. Likelihood can be expressed as a probability or with descriptive modifiers.

Project management has frameworks for managing assumptions and risks. Assumptions are documented in the assumptions log, tracked, validated, and the outcome communicated. Risks are recorded in the risk register, assessed, addressed, monitored, and responded to. Adhering to these practices will ensure better project outcomes.

Well put

Risk & assumptions are simply the unforeseeable events and conditions found within the log frame. Listing these will best prepare you for the road ahead.

Je suis ravi de savoir que le texte répond à vos attentes et que vous l'avez bien compris. Si vous avez d'autres questions ou si vous avez besoin d'une aide supplémentaire, n'hésitez pas à me le faire savoir. Je suis là pour vous aider !

Assumptions
An assumption is an idea that is accepted to be true without certainty. Until we validate assumptions, they also represent a risk. Risks are future events that have a likelihood of occurrence and an anticipated impact. Risks can be opportunities (positive) or threats (negative)

Managing risks is vital for successful project implementation. Identified risks, including inadequate community engagement and potential budget overruns, must be vigilantly addressed to ensure intervention effectiveness. Assumptions, guiding project planning, require continuous validation to align with the dynamic project environment. Balancing risk mitigation and assumption flexibility enhances project resilience, increasing the likelihood of achieving its goals.

I believe taking a good amount of time on clearly defining all Risks and Assumptions will save us from a lot of problems during project implimantation.

My project is a proposed education program to teach visitors about the lives of farmed animals in factory farming, and to encourage them to adopt plant-based diets. Some risks include:

• inputs: we will not be able to secure enough funding
• outputs: there may not be enough people registered to participate
• outcomes: people may not want to change their diets
• impact: the demand for farmed animals as food will not decrease

risk and assumptions are important assesments before the start of a project

risk and assumptions are important assesments before the start of a project

Risks are circumstances outside of your control that may disrupt your plan while assumptions are things that you believe without much evidence.

Incorporating a "Risks and Assumptions" section in project planning is crucial for realistic and effective project management. It not only prepares the project team for potential challenges but also ensures a shared understanding among stakeholders about the project's operating environment and expectations.

Incorporating a "Risks and Assumptions" section in project planning is crucial for realistic and effective project management. It not only prepares the project team for potential challenges but also ensures a shared understanding among stakeholders about the project's operating environment and expectations.

Incorporating a "Risks and Assumptions" section in project planning is crucial for realistic and effective project management. It not only prepares the project team for potential challenges but also ensures a shared understanding among stakeholders about the project's operating environment and expectations.

Risks and Assumptions are very key to projects in a sense that it allow you to know the effects and learn from your experiences. It also give a prior notice to what could be wrong with your logframe and work towards to achieve a great goal at the end of the project. We should always bear in mind that whatever we do, there are risks and we have to embrace them and know how to deal with them as we carry out our daily activities.

I had a project in which I had the goal to make money by selling 10000 Broilers. my inputs were chicken feed, shelter, labor, straw, time, etc. I want to get out as feed my chicken, protect them from outer environment, labor clean the shelter daily and feed chicken, use straw to avoid moisture, time to raise the chicken for 1 month. my intended outcome was to feed them until one month to gain 1kg weight.
The risks and assumptions:
the broilers might die if not properly vaccinated.
they might not gain expected weight if feed with less nutritious and cheap feed.
What if the chicken meat price per kg drop and I won't even cover my expenses.
if competitors dump their prices, will I be able to compete their prices?
Should I sell it on farm or transport it by myself to local market?

Its important to understand the risks and assumptions that we undertake at the time of project design. Risks are also something that one needs to constantly revisit, particularly in the access to justice space. Understanding risks is as important as strategizing on how to mitigate the risks in the event that they occur.

It seems to me that the example to explain risks and assumptions in this module is very clear. I am exciting to explore risks and assumptions in next module.

The logframe's "Risk and Assumption" column acts as a crucial reality check, identifying external factors that can make or break success. Assumptions are external conditions essential for progress, like stable funding or government support. Risks are potential threats, like funding cuts or competitor actions. By explicitly stating these, the logframe becomes a proactive tool, prompting contingency plans for risks and advocating for securing assumptions, ensuring a clear path towards achieving desired goals.

Identifying risks and assumption while designing a project is crucial before the project starts. This helps us come up with a project that is effective to answer to our impact. It helps eliminate biasness and identify things that could inhibit the plan at hand.
As a result it aids in the design phase for a project whose impact will be efficiently met.

Risks and assumptions may be seen as things that during your project phase would be outside your confines to control and might end up affecting the project implentations. And in order to avoid biases AssumptionAssumption are really needed to give you ample time to make decisions that will help reach a meaningful impact of the project

Risks and Assumptions are very crucial when preparing Logframe in order to know what occurrences may incurred during the implementation of the project. This will in the long run may help you monitor and track these risks and address them accordingly to enhance reliability and validity of results thereby reducing biases

Can you please throw more light on this assertion

That's nice. In other words you to prepare for these so that when they arise you sold have means to curb them.

The simplest way to make sure one have a successful project is making sure you have weighed assumptions and risks of the project
What if all have been done but the success of the project didn't go well?

Identifying risks and assumption while designing a project is crucial before the project starts. This helps us come up with a project that is effective to answer to our impact. It helps eliminate biasness and identify things that could inhibit the plan at hand.
As a result it aids in the design phase for a project whose impact will be efficiently met.

From the lessons I have learnt so far, I am sure that in a project logframe matrix, risks are uncertainties or potential obstacles that might impede the successful achievement of outcomes and impacts, while assumptions are underlying conditions or factors considered to be true but not fully within the project's control. Thus, identifying and addressing risks and assumptions is crucial for effective project planning and management, ensuring that potential challenges are acknowledged, and strategies are in place to mitigate or respond to uncertainties throughout the project lifecycle.

Risks and assumptions in a project are necessarily challenges, uncertainties, and underlying conditions that may impact the project's success, requiring careful consideration and preemptive planning for effective mitigation or adaptation strategies during a project's life cycle.

risks are unforeseen events that could pose challenges to the M&E process, while assumptions are underlying beliefs that, if incorrect, may impact the validity of monitoring and evaluation findings. Both need careful consideration and proactive management to ensure the reliability and success of M&E efforts.

An example of a risk is Imagine you're evaluating a community health program. A risk could be the sudden outbreak of a disease, which might affect the project's ability to achieve its health-related goals.

An example of an assumption is like if you assume that a training program's materials will be equally effective in all regions. However, this assumption may not hold true if there are regional variations in educational backgrounds or cultural preferences.

It is very important to analysis the risk in the project.
Because we can not have the project without the risk.
But I have some questions :
If the risk is important, can we abandon the project?

i also think that not every girl who will get a microloan will use it for business

risk assessment is one of major pillars in project management because this also help the team and stakeholders to set aside some resource that can help in case of these circumstances. therefore with a well planned assessment you can save time frame of your project.

hey guys we should also remember and put in mind that some assumptions, project stakeholders can question them

i like that simple and straight

Risks and assumptions are things that are likely to hinder your project. they are mostly things beyond your control but can be addressed

Risks are these things that may interrupt effective implementation of project activities and hence have a bearing on the outcomes and impact! An all round assessment to prepare on how to manage these potential occurrences during implementation is more likely to increase achievement of the project outcomes and the overall goal. The same process, when done before start of the project, is important at testing for and ruling out any biases that may affect efficiency and effectiveness of the project - that result from assumptions made.

Risks are these things that may interrupt effective implementation of project activities and hence have a bearing on the outcomes and impact! An all round assessment to prepare on how to manage these potential occurrences during implementation is more likely to increase achievement of the project outcomes and the overall goal. The same process, when done before start of the project, is important at testing for and ruling out any biases that may affect efficiency and effectiveness of the project - that result from assumptions made.

Insightful lesson on how assumptions and risk can contribute towards the downfall of a project. However, I am now equipped in asking the right questions at every level (input to outcome) to ensure the what ifs are eradicated.

The riks and Asumptions are really important in logframes

Risks are things or factors beyond your control that may affect negatively implementation of project or achieving intended goals/impact, output and outcome.

Assumption these are fearing without statistical backing (Without evidence). Usually they are bias

Assumptions are the conditions or factors that you expect to be true or present for your project to achieve its objectives. Risks are the events or situations that may prevent or hinder your project from reaching its goals. Both assumptions and risks can be internal or external, positive or negative, and vary in their likelihood and severity. In M&E, you need to identify and analyze the assumptions and risks that are relevant to your project's theory of change, logic model, indicators, data collection, analysis, and reporting.

Risks and assumptions are the loopholes that exist in a project, advancing without tackling them means that the goal or impact of the project might never be achieved.

Assumptions are our beliefs (validated or not) about existing conditions that may affect the achievement of results

Risks are the things outside of your control that might disrupt your project plan while assumptions are the biases a person have about a subject, assumptions are not evidenced based or backed up by data and might turn out to be wrong.
When designing a project, it is important to identify the risk and assumptions before the project starts so that it will not disrupt your plan.

Risks are future events that have a likelihood of occurrence. Risks can be opportunities (positive) or threats (negative). However, an assumption is an idea that is accepted to be true without certainty.
Both assumptions and risks can be internal or external factors which impacts vary on the project. Until we validate assumptions, they also represent a risk. In other cases, they may have a severe influence on whether we will be able to realize the project objectives. In the worst-case scenario, we may be forced to stop the project altogether.
Identifying risks and assumptions helps an organization prepare for potential challenges in meeting the project’s goal. It also aids in planning ahead and making decisions at the right time.

In project management, identifying risks and making assumptions are essential for effective planning and decision-making. Risks are potential events or situations that could negatively impact a project, while assumptions are statements or conditions believed to be true but not fully validated.

Risks can arise from various sources such as technical challenges, resource limitations, or external factors. By identifying and assessing risks, project managers can develop mitigation strategies to minimize their impact on project objectives. For example, allocating extra time for testing can help address potential technical challenges, while exploring outsourcing options can mitigate resource shortages.

Assumptions are made when there is uncertainty or incomplete information. They guide project planning and decision-making but need to be regularly reviewed and validated. For instance, assuming that users prefer a simple user interface can influence design decisions, but user testing should validate this assumption to ensure user satisfaction.

Both risks and assumptions require proactive management throughout the project lifecycle. Regular risk assessments and updating assumptions based on new information or validation help ensure the project stays

risks and assumptions are all the things that can disrupt your plan and you have some important questions you have to ask like what could go wrong ? is there anything that might prevent you from providing the inputs? and if you have the inputs like money etc , are you sure that this will lead you to the outputs?

Risks:

In the realm of project planning and management, several potential risks could impact the successful execution of initiatives. Financial uncertainty represents a key risk, encompassing unexpected budget constraints or alterations in funding sources that may impede the project's ability to achieve its goals. Operational risks, such as disruptions, logistical challenges, or technical issues, pose threats to the day-to-day functions of the project. External factors, including shifts in government policies, economic conditions, or unforeseen natural disasters, introduce uncertainties that must be navigated. Human resource risks involve challenges related to the availability and performance of team members, including turnover, skill deficiencies, or collaboration difficulties. Technical risks, encompassing technology failures, data security concerns, or changes in industry standards, also warrant careful consideration.

Assumptions:

A series of assumptions underpin the foundation of project planning, influencing decision-making and strategic direction. An assumption regarding stakeholder collaboration implies an expectation that key stakeholders will collaborate effectively, contributing the anticipated resources and support. External factors, such as political stability and economic conditions, are assumed to remain favorable for the project's duration. Assumptions about technology involve expectations that chosen tools and technologies will function as anticipated and remain up-to-date throughout the project. The assumption about project timelines being realistic and achievable is pivotal, considering potential delays or unforeseen circumstances. Assumptions about beneficiary behavior, such as their active engagement with project activities, form an integral part of planning but need validation and adjustment as the project unfolds. Regular monitoring, evaluation, and open communication within the project team and with stakeholders are critical to address and mitigate these potential challenges effectively.

Risk and Assumption is basically about determining the likelihood that a vulnerability, threat, or occurrence could impact the organization and what the consequences or impact would be if it were to occur.

Risks are the things outside of your control that might disrupt your project plan while assumptions are the biases a person have about a subject, assumptions are not evidenced based or backed up by data and might turn out to be wrong.
When designing a project, it is important to identify the risk and assumptions before the project starts so that it will not disrupt your plan.

The topic on risks and assumptions has really helped me by compartmentalizing them for each component of the log frame. I have already applied the lessons to a project that I am currently working on, and I can already see the results. My team and I have managed to plan better for the project implementation.

Assumptions and risks are outside variables that the project has limited control over but that could affect its operations and outcomes. Events, situations, and/or societal ideas are frequently linked to the components. An organization can better plan for potential obstacles to achieving the program's goal and assess whether a program redesign is warranted by identifying risks and assumptions. For instance, it can be essential to modify the program or start with adding more activities that will increase community support if an assumption indicates that the community might not be open to the activity.

Risk and assumptions are very significant to the successfulness of every project .
If an organization does not take into consideration the risk and and assumptions of her project the aims and objectives of the organization would not be full met. For instance, having a party for mom is a very good idea. However, if this is not well discussed with mom to get her feedback during the planning process, and we go ahead in planning the program to make it a surprise for mom, and there is a certain aspect of the party that mom does not like, our aim and objective of making mom happy will not be achieved. Because we assumed that mom would be happy with everything.

I have learned the difference between Risk and Assumptions which are two different things but goes together most of the time.

A risk represents a potential problem or event that could cause harm, lead to project delays, increase costs, or otherwise negatively impact the project if it occurs. Risks are characterized by the combination of the probability of an event happening and the impact or consequence should that event occur. Risk management involves identifying, analyzing, assessing, and addressing these potential negative events to minimize their likelihood or impact on the project.

While the assumption assumed to be true for the purposes of planning and executing the project. Assumptions are generally based on the current knowledge and understanding of a situation. They are accepted as truths without proof in the planning phase and become the basis for how the project is structured. However, because they are not guaranteed, there is an inherent risk that the assumption could prove to be false. If an assumption turns out to be incorrect, it can affect the project's outcomes much like a risk. Therefore, part of project risk management includes validating assumptions and monitoring them throughout the lifecycle of the project.

It is very important to analysis the risk in the project.
Because we can not have the project without the risk.
But I have some questions :
If the risk is important, can we abandon the project?

Risks are factors out of the project's control that can impede or prevent the success of the project and may affect it from inputs, outputs, outcomes, and even impact. Assumptions are beliefs that are not based on evidence that could be untrue in the end and hurt the expected outcome of the project: These can range from cognitive information that has been taken in from growing up, culture, and upbringing. These are usually refers to as biases and they are a preference that the project designer has to certain things.
To avert and prevent the adverse effects of this bias on the project, evidence from research and other studies is needed. This may include a tried-out theory of change or any study that directly or closely links to the input, outputs, and outcomes.

Data Verification

Data Quality

Data Analysis & Use

Logframe (Logical Framework)
A tool for project design. A logframe describes:

The project’s activities

The project’s short-term and long-term goals

How progress towards goals will be measured

Risks that might prevent you from reaching your goals

Inputs
These are the resources that go into your project. Examples include:

money

activity space

an expert’s time

Outputs
These are the products or services that your project makes. Examples include:

homes built

loans given

workshops held

Outcomes
These are the positive effects of your project. Examples include:

participants learning new skills

the rate of an illness going down

Impact
This is the large positive change that you hope your project will create for the world. Examples include:

improving the health of a target population

saving a species from extinction

Risks
Factors outside of your control that could cause your project to go poorly. Examples include:

participants may not be able to get to the workshop

funds intended for the project may be taken by government officials

Assumptions
Things that you believe but that are not supported by evidence. Examples include:

participants will be allowed to join this activity

participants who have learned financial skills will want to save money

There is a big difference between risks and assumptions when it comes to monitoring and evaluation. Risks can be anything that can cause disruption of your plan outside of your control. Assumptions, on the other hand, are what you believe in, though they aren't backed by any evidence. They are based on your own biases. However, we might think that when you sit down to plan and anticipate anything that may cause a certain disruption to your project, be it a risk or opportunity, aren't we making assumptions? We are basing off what we think might happen but not quite sure whether it will truly happen. This is where I believe there is a correlation between risks and assumptions. We sit down and make assumptions, based on our knowledge, the risks and opportunities our project might face. In this case, the said risks end up becoming assumptions.

As I learned, there is a difference between risks and assumptions when it comes to planning a project. However, can there not be a correlation between risks and assumptions? Risks are the things that may disrupt your plan, that are out of your control. You can't do anything about them. Assumptions, on the other hand, are the beliefs you have, which are not backed by any evidence. They are your own biases.
This is where I want to connect the two. When we sit down and make a plan, we also have to anticipate risks that the project might face. In this situation, can't the presented risks not be assumptions? Because they are based off our knowledge, and we have no evidence as to whether they will or will not happen.

As I learned, there is a difference between risks and assumptions when it comes to planning a project. However, can there not be a correlation between risks and assumptions? Risks are the things that may disrupt your plan, that are out of your control. You can't do anything about them. Assumptions, on the other hand, are the beliefs you have, which are not backed by any evidence. They are your own biases.
This is where I want to connect the two. When we sit down and make a plan, we also have to anticipate risks that the project might face. In this situation, can't the presented risks not be assumptions? Because they are based off our knowledge, and we have no evidence as to whether they will or will not happen.

risks and Assumptions of a logframe lists all the things that might disrupt your plan.

Assumption; are your biases, the things that you believe without much evidence .

the risks and assumption of the logframe are the things that can disturb your plan. we I say plan I mean each plan for each level of logframe, i.e input, output, outcome and the impact. these are the things that could go wrong at each level of the logframe, things can could go wrong which will make us not to achieve our input, output, outcome and impact.

the risks and assumption of the logframe are the things that can disturb your plan. we I say plan I mean each plan for each level of logframe, i.e input, output, outcome and the impact. these are the things that could go wrong at each level of the logframe, things can could go wrong which will make us not to achieve our input, output, outcome and impact.

risks and Assumptions of a logframe lists all the things that might disrupt your plan.

Assumption; are your biases, the things that you believe without much evidence .