Please update your browser

We have detected that you are using an outdated browser that will prevent you from using
certain features. An update is required to improve your browsing experience.

Use the links below to upgrade your existing browser

Hello, visitor.

Register Now

  • facility management

    Dampness in building: Causes, Effects, Prevention and Cure

    Dampness in a simple term is when excess water molecule is on building which results to visible growth of mould and destruction or disturbance of wall surfaces and materials.

    CAUSES
    1.Rain– If the roof is not well constructed to take out rain water, it may lead to dampness on walls due to leakages down from roof to wall.

    2.Faulty Plumbing System-Leaking pipes will cause water to affect the building, which also leads to dampness.

    3.Waterlogged soil-Moisture in the soil can rise up into the building through capillary action and cause dampness in building.

    4.Area susceptible to extreme flood and bad weather condition.

    5.Area close to canal/gully etc which can experience an overflow of water.

    6.Using wet or unseasoned building materials.

    7.Air conditioning system-When hot humid air comes in contact with materials cooled by the airconditioning process, it causes condensation on the liquid water on the surfaces.

    1. Indoor activities-Which releases moisture into the air like cooking, dishwashing, clothes washing, bathing etc.

    9.Roof- Leak from bad slate/tile or cracked concrete gutter will increase build up of moisture in walls ,timber and plaster.

    10.Poor quality works-Water penetration through walls can occur as a result of inadequately installed roof covering,improper treatment or covering of oversite concrete (German floor).

    11.Use of non porous or breathable coatings on walls-Such as fine cement render (Screeding) and oil paint. When moisture is absorbed through fine cracks in the coatings but can’t then evaporate back out through the waterproof surface.

    12 .Higher external ground level around the property. That is when the building level is lower to the road and the surrounding environment.

    EFFECTS
    1.It causes efflorescence which may ultimately result in disintegration of bricks, stones, tiles etc.
    2.Causes rotting of wood.
    3.Deteriorate electric installations.
    4.It may result in softening and crumbling of plaster.
    5.Causes petting off and removal of plaster.
    6.It may cause bleaching and flaking of paint with the formation of coloured patches.
    7.It may result in the warping, buckling and rotting of timber.
    8.It may lead to the corrosion of metallic fixtures.
    9.It promotes growth of termites.
    10.Deteriorate carpet & furniture’s.
    11.Causes spots on the floors and walls.
    12.Causes bleaching and blistering of paints.
    13.Dangerous for the health of occupants.
    14.Reduce the life of structures.

    PREVENTION
    1.Introducing damp proof course during construction of foundation especially in waterlogged area.

    2.Using raft foundation mostly in waterlogged area.

    3.proper concrete mix ratio and fine aggregates which helps to make concrete impervious.

    4.Adequate concrete thickness.

    5.using bitumen on concrete roof surfaces.

    6.Mixing waterproof cement with concrete.

    1. Using breathable paint e.g emulsion paint.

    8.cavity wall construction- This is shielding the main wall of the building by an outer skin wall leaving a cavity in between the two. The cavity prevents the moisture from travelling from the outer to the inner walls.

    1. the type of flooring (concrete floor system) we commonly use isn't a strong resistance to dampness thus the need to introduce a more stiffer resistance flooring especially as used in conventional constructions in most developing worlds. Example of such flooring is the clay pot flooring and polystyrene floors. Without prejudice to their disadvantages, they stand to be strong reagents to dampness.

    CURE
    1.Block every leaks from internal plumbing systems i.e replace damaged pipes and make sure the joints are properly sealed.

    2 .Repair leaking water and damaged overflow downpipes.

    1. Repair damaged below ground drainages.

    2. Pipe away rainwater from roof out of building either to main drain or soakaway.

    5.Check and repair blockages to downpipes.

    1. Avoid trees of strong roots too close to the building to stop cracks on walls and damage to pipes.

    7.lower the groundfloor outside the building if possible.

    8.Opening up a building to allow air to flow in and out is important-The problem with long inhabited buildings.

    1. Use of vents in buildings.

    10.Breathable or permeable internal paints to allow the dispersal of moisture from a plastered wall.

  • @iletuma said in facility management:

    Dampness in building: Causes, Effects, Prevention and Cure
    Dampness in a simple term is when excess water molecule is on building which results to visible growth of mould and destruction or disturbance of wall surfaces and materials.
    CAUSES
    1.Rain– If the roof is not well constructed to take out rain water, it may lead to dampness on walls due to leakages down from roof to wall.
    2.Faulty Plumbing System-Leaking pipes will cause water to affect the building, which also leads to dampness.
    3.Waterlogged soil-Moisture in the soil can rise up into the building through capillary action and cause dampness in building.
    4.Area susceptible to extreme flood and bad weather condition.
    5.Area close to canal/gully etc which can experience an overflow of water.
    6.Using wet or unseasoned building materials.
    7.Air conditioning system-When hot humid air comes in contact with materials cooled by the airconditioning process, it causes condensation on the liquid water on the surfaces.

    Indoor activities-Which releases moisture into the air like cooking, dishwashing, clothes washing, bathing etc.

    9.Roof- Leak from bad slate/tile or cracked concrete gutter will increase build up of moisture in walls ,timber and plaster.
    10.Poor quality works-Water penetration through walls can occur as a result of inadequately installed roof covering,improper treatment or covering of oversite concrete (German floor).
    11.Use of non porous or breathable coatings on walls-Such as fine cement render (Screeding) and oil paint. When moisture is absorbed through fine cracks in the coatings but can’t then evaporate back out through the waterproof surface.
    12 .Higher external ground level around the property. That is when the building level is lower to the road and the surrounding environment.
    EFFECTS
    1.It causes efflorescence which may ultimately result in disintegration of bricks, stones, tiles etc.
    2.Causes rotting of wood.
    3.Deteriorate electric installations.
    4.It may result in softening and crumbling of plaster.
    5.Causes petting off and removal of plaster.
    6.It may cause bleaching and flaking of paint with the formation of coloured patches.
    7.It may result in the warping, buckling and rotting of timber.
    8.It may lead to the corrosion of metallic fixtures.
    9.It promotes growth of termites.
    10.Deteriorate carpet & furniture’s.
    11.Causes spots on the floors and walls.
    12.Causes bleaching and blistering of paints.
    13.Dangerous for the health of occupants.
    14.Reduce the life of structures.
    PREVENTION
    1.Introducing damp proof course during construction of foundation especially in waterlogged area.
    2.Using raft foundation mostly in waterlogged area.
    3.proper concrete mix ratio and fine aggregates which helps to make concrete impervious.
    4.Adequate concrete thickness.
    5.using bitumen on concrete roof surfaces.
    6.Mixing waterproof cement with concrete.

    Using breathable paint e.g emulsion paint.

    8.cavity wall construction- This is shielding the main wall of the building by an outer skin wall leaving a cavity in between the two. The cavity prevents the moisture from travelling from the outer to the inner walls.

    the type of flooring (concrete floor system) we commonly use isn't a strong resistance to dampness thus the need to introduce a more stiffer resistance flooring especially as used in conventional constructions in most developing worlds. Example of such flooring is the clay pot flooring and polystyrene floors. Without prejudice to their disadvantages, they stand to be strong reagents to dampness.

    CURE
    1.Block every leaks from internal plumbing systems i.e replace damaged pipes and make sure the joints are properly sealed.
    2 .Repair leaking water and damaged overflow downpipes.

    Repair damaged below ground drainages.

    Pipe away rainwater from roof out of building either to main drain or soakaway.

    5.Check and repair blockages to downpipes.

    Avoid trees of strong roots too close to the building to stop cracks on walls and damage to pipes.

    7.lower the groundfloor outside the building if possible.
    8.Opening up a building to allow air to flow in and out is important-The problem with long inhabited buildings.

    Use of vents in buildings.

    10.Breathable or permeable internal paints to allow the dispersal of moisture from a plastered wall.

Looks like your connection to PhilanthropyU was lost, please wait while we try to reconnect.